Sitemap

About Us

Products / Coil & Bar / Product Application / Wire Rods

Wire Rods

Alloy Steel		Grades
		Specification

Bearing Quality Steel		Grades
		Specification

Carbon Steel		Grades
		Specification

CHQ Steel		Grades
		Specification

Electrode Quality Steel		Grades
		Specification

Free Cutting Steel		Grades
		Specification

High Cutting Steel		Grades
		Specification

Low Carbon Steel		Grades
		Specification

Spring Steel		Grades
		Specification

Some of the popular grades offered for Wire Rods under the Alloy Steel category are as follows :

Equivalent Grades
Internal Standard	BS	DIN	IS	EN	SAE/AISI
EN18	530A40	37Cr4	40Cr1	EN18	5140
EN24	817M40	34CrNiMo6	40NiCr4Mo3	EN24	4340
EN19C	709M40	-	40Cr4Mo3	EN19C	4140,4142
EN19	709M40	42Cr4Mo2	40Cr4Mo3	EN19	4140,4142
EN18D	530A40	37Cr4	40Cr1	EN18D	5140
EN18C	530A40	37Cr4	40Cr1	EN18C	5140
EN353	815M17	-	15NiCr1Mo12	EN353	-
EN18A	530A40	37Cr4	40Cr1	EN18A	5140
EN354	820M17	-	15NIVCr1Mo15	EN354	4320
27C15	-	28Mn6	27C15	-	1527
20MnCr5	-	20MnCr5	20MnCr1	-	-
20Mn2	150M28	-	20Mn2	EN14A	1524
16MnCr5	-	16MnCr5	17Mn1Cr95	-	5120
15Cr3	523A14	15Cr3	15Cr65	EN206	5015
FILESTEEL	-	-	-	-	-
EN18B	530A40	37Cr4	40Cr1	EN18B	5140
SCM420	708M20	-	-	-	-
SAE8620	805M20	-	20NiCrMo2	EN362	SAE8620

Sizes (mm)
5, 5.5, 6.35, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16.5, 17.5, 18.5, 20, 21, 22, 23, 24, 25.4

Metallurgical Specifications
Surface Defect = 1.0 % of Wire Rod Diameter (maximum)
Depth of Decarburisation = 1.0% of Wire Rod Diameter (maximum)

Grain Size
We offer fine grain steel or as per customer requirement through Silicon Killed / Aluminium Killed steel

Gaseous Content
With our Vacuum Degassing facility, we can deliver controlled levels of Hydrogen, Oxygen and Nitrogen as required for critical applications.

Inclusion Rating - ASTM E45A

A		B		C		D
T	H	T	H	T	H	T	H
2	1	2	1.5	2	1	2	1

DIN 50602-K ratings, JIS G 0558,ISO 4967 ratings can also be tested and reported

Dimensional Specifications

Diameter Range	Ovality*	Permissible Tolerance*
5 to 17.5 mm	0.4 mm maximum	± 0.30 mm max.
18.5 to 25.4 mm	0.5 mm maximum	± 0.40 mm max.

* We can adhere to stricter specifications on mutual agreement.

Coil Particulars

Particulars	Block Route (5.5 mm to 17.5 mm diameter)	Garret Route (18.5 mm to 25.4 mm diameter)
Supply Condition	Retarded Cooled/ Hot Rolled	Hot Rolled
Coil Weight	1 Ton / 2 Ton	800 kg
Coil Inner Diameter	850 mm	850 mm
Coil Outer Diameter	1150 to 1250 mm	1250 to 1400 mm
Coiling Direction	Counter Clockwise	Counter Clockwise
Binding	Wire (Auto Compaction)	Wire / Strap

Disclaimer
The above specifications are aimed towards highlighting our capabilities. The figures are indicative and we can adhere to stricter specifications on mutual agreement. Whilst every attempt has been made to ensure accuracy in the above content, the information contained herein does not form the part of any contract and hence is not subject to claims

Some of the popular grades offered for Wire Rods under the Bearing Quality Steel category are as follows :

Internal Standard	Equivalent Grades
Internal Standard	BS	DIN	IS	EN	SAE/AISI
SAE52100	534A99/535A99	100Cr6	103Cr1	EN31	SAE52100
EN31M	534A99/535A99	100Cr6	103Cr1	EN31M	52100
EN31	534A99/535A99	100Cr6	103Cr1	EN31	52100

Sizes (mm)
5, 5.5, 6.35, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16.5, 17.5, 18.5, 20, 21, 22, 23, 24, 25.4

Metallurgical Specifications
For EN31/EN31M grade, Surface Defect = 1.5 % of Wire Rod Diameter (maximum)
For SAE52100 grade, Surface Defect = 1% of Wire Rod Diameter (maximum)

Depth of Decarburisation
For SAE52100, Depth of Decarburisation = 1% of Wire Rod Diameter (maximum)
For rest, Depth of Decarburisation = 1.5% of Wire Rod Diameter (maximum)

Grain Size
We offer fine grain steel or as per customer requirement through Silicon Killed / Aluminium Killed steel.

Gaseous Content
Nitrogen = 70 ppm (maximum)
With our Vacuum Degassing facility, we can adhere to stricter specifications on mutual agreement

Dimensional Specifications

Diameter Range	Ovality*	Permissible Tolerance*
5 to 17.5 mm	0.4 mm maximum	± 0.30 mm max.
18.5 to 25.4 mm	0.5 mm maximum	± 0.40 mm max.

* We can adhere to stricter specifications on mutual agreement.

Coil Particulars

Particulars	Block Route (5.5 mm to 17.5 mm diameter)	Garret Route (18.5 mm to 25.4 mm diameter)
Supply Condition	Retarded Cooled/ Hot Rolled	Hot Rolled
Coil Weight	1 Ton / 2 Ton	800 kg
Coil Inner Diameter	850 mm	850 mm
Coil Outer Diameter	1150 to 1250 mm	1250 to 1400 mm
Coiling Direction	Counter Clockwise	Counter Clockwise
Binding	Wire (Auto Compaction)	Wire / Strap

Internal Standard	Equivalent Grades
Internal Standard	BS	DIN	IS	EN	SAE/AISI	JIS
EN15B	150M36	36Mn5	37Mn2, 37C15	EN15B	1536	-
EN32B	-	CK15	C14	EN32B	1015,1016,1018	-
SAE1038	-	CK38	-	-	1038	-
EN43C	-	-	C50	EN43C	1050	-
CK45	-	CK45	45C8	1045	-	-
EN9	070M55	CK55	C55	EN9	1055	-
C35	-	C35	35C8, C35Mn75	-	1035	-
EN42	-	CK75	80C6	EN42	1074	-
EN42B	-	C67	65C6	EN42B	1065	-
EN43	080M50	C55	60C6	EN43	1055	-
EN43B	080A47	CK45	-	EN43B	1045	-
SAE1541	150M36	36Mn7	37C15	EN15,15A	SAE1541	SMn438
EN8	080A40	CK45	45C8	EN8	1040,1045	-
EN8A	080A40	CK45	45C8	EN8A	1040,1045	-
EN8B	080A40	CK45	45C8	45C8	1040,1045	-
EN8C	080A40	CK45	45C8	EN8C	1040,1045	-
EN8D	080A40	CK45	45C8	EN8D	1040,1045	-

Sizes (mm)
5, 5.5, 6.35, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16.5, 17.5, 18.5, 20, 21, 22, 23, 24, 25.4

Metallurgical Specifications
Surface Defect = 1.0% of Wire Rod Diameter (maximum)
Depth of Decarburisation = 1.0% of Wire Rod Diameter (maximum)

Grain Size
We can offer both fine grain and coarse grain steel depending on customers' requirement through Silicon Killed / Aluminium Killed steel.

Gaseous Content
With our Vacuum Degassing facility, we can deliver controlled levels of Hydrogen, Oxygen and Nitrogen as required for critical applications.

Inclusion Rating - ASTM E45A

A		B		C		D
T	H	T	H	T	H	T	H
2	1	2	1.5	2	1	2	1

Dimensional Specifications

Diameter Range	Ovality*	Permissible Tolerance*
5 to 17.5 mm	0.4 mm maximum	± 0.30 mm max.
18.5 to 25.4 mm	0.5 mm maximum	± 0.40 mm max.

* We can adhere to stricter specifications on mutual agreement.

Coil Particulars

Particulars	Block Route (5.5 mm to 17.5 mm diameter)	Garret Route (18.5 mm to 25.4 mm diameter)
Supply Condition	Retarded Cooled/ Hot Rolled	Hot Rolled
Coil Weight	1 Ton / 2 Ton	800 kg
Coil Inner Diameter	850 mm	850 mm
Coil Outer Diameter	1150 to 1250 mm	1250 to 1400 mm
Coiling Direction	Counter Clockwise	Counter Clockwise
Binding	Wire (Auto Compaction)	Wire / Strap

Some of the popular grades offered for Wire Rods under the Cold Heading Quality Steel category are as follows :

Internal Standard	Equivalent Grades
Internal Standard	BS	DIN	IS	EN	SAE/AISI	JIS
SAE1020CHQ	070M20	CK22	C20	EN 3A	SAE1020	SWRCH20A
SAE1022CHQ	-	-	-	-	SAE1022	-
SAE4140CHQ	709M40	42CrMo4	40Cr4Mo3	EN19	SAE4140	SCM440
SAE1018CHQ	-	H111	C-15Mn75	EN2C	SAE1018	-
SAE1541CHQ	150M36	36Mn7	37C15	EN15,15A	SAE1541	SMn438
15B41	-	-	-	-	15B41	-
1045CHQ	-	CK45,C45	45C8,C45	-	1045	-
SAE1015CHQ	-	CK15	-	EN32B	SAE1015	-
1038CHQ	-	CK38	-	-	1038	-
SAE1012CHQ	040A12	CK10	C7, C10	2A/1,2B	SAE1012	SWRCH12A
15B25	-	-	26C10BT	-	15B25	-
SAE1010CHQ	-	CK10	C10	-	SAE1010	-
10B21	-	-	21C10BT	-	10B21	-
SAE1008CHQ	040A04	C10	C5	2A,2A/1,2B	SAE1008	SWRCH8A

Sizes (mm)
5, 5.5, 6.35, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16.5, 17.5, 18.5, 20, 21, 22, 23, 24, 25.4

Metallurgical Specifications
Surface Defect = 1% of Wire Rod Diameter (maximum)
Depth of Decarburisation = 1% of Wire Rod Diameter(maximum)

Grain Size
We can offer both fine grain and coarse grain steel depending on customers' requirement through Silicon Killed / Aluminium Killed steel.

Gaseous Content
With our Vacuum Degassing facility, we can deliver controlled levels of Hydrogen, Oxygen and Nitrogen as required for critical applications.

Inclusion Rating

A		B		C		D
T	H	T	H	T	H	T	H
2	1	2	1.5	2	1	2	1

Dimensional Specifications

Diameter Range	Ovality*	Permissible Tolerance*
5 to 13 mm	0.4 mm maximum	± 0.30 mm maximum
14 to 25.4 mm	0.5 mm maximum	± 0.50 mm maximum

* We can adhere to stricter specifications on mutual agreement.

Coil Particulars

Particulars	Block Route (5.5 mm to 16.5 mm diameter)	Garret Route (18.5 mm to 25.4 mm diameter)
Supply Condition	Retarded Cooled/ Hot Rolled	Hot Rolled
Coil Weight	1 Ton / 2 Ton	750 kg
Coil Inner Diameter	850 mm	850 mm
Coil Outer Diameter	1150 to 1250 mm	1250 to 1400 mm
Coiling Direction	Counter Clockwise	Counter Clockwise
Binding	Wire (Auto Compaction)	Wire / Strap

Some of the popular grades offered for Wire Rods under the Electrode Quality Steel category are as follows :

Internal Standard	Equivalent Grades
Internal Standard	DIN	IS
WR3	-	S4
WJM1	-	S4
WR4	-	-
ER70S3	-	S4
AS2MO	11MnMo45	-
ER70S6	-	S2
WR1	12Mn8	-
EM12K	-	-
EB2	-	-
SA12	-	-
EWNR	-	-
ER90SG	-	-
WR6	-	-
ER70S2	-	-
EA2	-	-

Sizes (mm)
5, 5.5, 6.35, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16.5, 17.5, 18.5, 20, 21, 22, 23, 24, 25.4

Metallurgical Specifications

Surface Defect
For EWNR (Low Carbon, Low Silicon) = 2% Wire Rod Diameter (maximum)
For Special Electrode Quality (High Manganese and High Silicon) = 1.5% of Wire Rod Diameter (maximum)

Depth of Decarburisation
1.5% of Wire Rod Diameter (maximum)

Grain Size
We can offer both fine grain and coarse grain steel depending on customers' requirement through Silicon Killed / Aluminium Killed steel

Gaseous Content
With our Vacuum Degassing facility, we can deliver controlled levels of Hydrogen, Oxygen and Nitrogen as required for critical applications.

Inclusion Rating

A		B		C		D
T	H	T	H	T	H	T	H
2	1	2	1.5	2	1	2	1

Dimensional Specifications

Diameter Range	Ovality*	Permissible Tolerance*
5 to 13 mm	0.4 mm maximum	± 0.30 mm maximum
14 to 25.4 mm	0.5 mm maximum	± 0.50 mm maximum

* We can adhere to stricter specifications on mutual agreement.

Coil Particulars

Particulars	Block Route (5.5 mm to 16.5 mm diameter)	Garret Route (14 mm to 25.4 mm diameter)
Supply Condition	Retarded Cooled/ Hot Rolled	Hot Rolled
Coil Weight	1 Ton / 2 Ton	750 kg
Coil Inner Diameter	850 mm	850 mm
Coil Outer Diameter	1150 to 1250 mm	1250 to 1400 mm
Coiling Direction	Counter Clockwise	Counter Clockwise
Binding	Wire (Auto Compaction)	Wire / Strap

Some of the popular grades offered for Wire Rods under the Free Cutting Steel category are as follows :

Internal Standard	Equivalent Grades
Internal Standard	BS	DIN	IS	EN	SAE/AISI	JIS
EN15(AM)	216M36	-	40Mn15S12	ENI5(AM)	1137	-
EN1A	220Mo7	9SMn28	11C10S25	EN1A	1213	SUM22
EN1APB	220Mo7Pb	9SMnPb36	-	EN1APB	12L14	SUM24L
EN8M	212M36	-	40C10S18	EN8M	1I46	-
SAE1146	-	-	40C10S18	EN8M	SAE1146	-

Sizes (mm)
5, 5.5, 6.35, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16.5, 17.5, 18.5, 20, 21, 22, 23, 24, 25.4

Metallurgical Specifications
Surface Defect = 2% of Wire Rod Diameter (max)
Depth of Decarburisation = 1.5% of Wire Rod Diameter (maximum)

Grain Size
We can offer both fine grain and coarse grain steel depending on customers' requirement through Silicon Killed / Aluminium Killed steel.

Gaseous Content
With our Vacuum Degassing facility, we can deliver controlled levels of Hydrogen, Oxygen, Nitrogen as required for critical applications.

Dimensional Specifications

Diameter Range	Ovality*	Permissible Tolerance*
5 to 13 mm	0.4 mm maximum	± 0.30 mm maximum
14 to 25.4 mm	0.5 mm maximum	± 0.50 mm maximum

* We can adhere to stricter specifications on mutual agreement.

Coil Particulars

Particulars	Block Route (5.5 mm to 16.5 mm diameter)	Garret Route (14 mm to 25.4 mm diameter)
Supply Condition	Retarded Cooled/ Hot Rolled	Hot Rolled
Coil Weight	1 Ton / 2 Ton	750 kg
Coil Inner Diameter	850 mm	850 mm
Coil Outer Diameter	1150 to 1250 mm	1250 to 1400 mm
Coiling Direction	Counter Clockwise	Counter Clockwise
Binding	Wire (Auto Compaction)	Wire / Strap

Some of popular Grades offered for Wire Rods under the High Carbon Steel category are as follows :

Internal Standard	Equivalent Grades
Internal Standard	EN	SAE/AISI	JIS***
PC77	-	1075	SWRH77B
PC80	-	1080	SWRH82B
PC80CR	-	1080	SWRH82B
PC270K	-	1080	SWRH82B
PC270KCrV	-	1080	SWRH82B
R30	EN5D	1030	SWRH32B
R35	-	1035	SWRH37B
R40	EN8	1040	SWRH42B
R45	EN43B	1045	SWRH47B
R50	-	1050	SWRH52B
R55	EN9	1055	SWRH57B
R60	EN43D	1060	SWRH62B
R65	EN42B	1065	SWRH67B
R70	-	1070	SWRH72B
R75	-	1075	SWRH77B, SUP3
R80	-	1080	SWRH82B
R80M	-	1085	SWRH87B
R95	-	1090	3CD95A

*** We also manufacture A Category grades. For these grades, UTS mentioned would be slightly lower by approximately 5 Kg / mm2

Sizes (mm)
5, 5.5, 6.35, 7, 8, 9, 10, 11, 12, 13, 14

Metallurgical Specifications Maximum Cold Reduction Recommended (%) Upto 0.50 % of Carbon we recommend 95% Above 0.50 % of Carbon we recommend 90% Surface Defect = 1.5% of Wire Rod Diameter (maximum) Depth of Decarburisation = 1.5% of Wire Rod Diameter (maximum) Supply Condition = Control Cooled
Grain Size We offer fine grain steel or as per customer requirement through Silicon Killed / Aluminium Killed steel

UTS Kg/mm2 (Minimum/ Maximum)

The grade wise size wise UTS variation for control cooled High Carbon Wire Rods is as follows :

Grade	Size (mm)
Grade	5.0	5.5	6.35	7.0	8.0	9.0	10.0	11.0	12.0	13.0
R40	71/ 83	70/ 82	69/ 81	68/ 80	65/ 77	-	-	-	-	-
R45	76/ 88	75/ 87	74/ 86	73/ 85	70/ 82	-	-	-	-	-
R50	82/ 94	81/ 93	81/93	81/ 93	80/ 92	78/ 90	-	-	-	-
R55	88/ 100	87/ 99	86/ 97	86/ 97	83/ 95	81/ 93	81/ 93	84/ 96	83/ 95	-
R60	91/ 103	90/ 101	89/ 101	89/ 101	87/ 99	86/ 98	85/ 97	-	-	-
R65	97/ 109	95/ 107	95/ 107	95/ 107	92/ 104	89/ 101	88/ 100	-	85/ 97	-
R70	101/113	100/112	110/112	100/112	98/ 110	96/ 108	95/ 107	-	-	-
R75	107/119	106/118	106/ 118	105/ 117	105/117	103/115	103/115	102/114	100/112	-
R80	114/ 126	112/ 124	112/ 124	112/ 124	110/ 122	108/ 120	106/ 118	104/ 116	102/ 114	-
R80V	118/ 130	116/ 128	115/ 127	115/ 127	112/ 124	110/ 122	108/ 120	105/ 117	104/ 116	-
PC77	-	-	111/ 123	111/ 123	108/ 120	106/ 118	-	-	-	-
PC80Cr	-	-	-	-	-	-	111/ 123	110/ 122	109/ 121	-
PC80CrV	-	-	-	-	-	-	-	-	114/ 126	112/124
PC270CrV	-	-	-	-	-	-	-	115/127	114/126	-
PC77Cr	-	-	-	113/125	110/ 122	108/ 120	105/ 107	105/ 116	103/ 115	-

For A Category JIS specification grades, the UTS would be approximately lower by 5 Kg/mm2

Gaseous Content
Nitrogen = 70 ppm (max) With our Vacuum Degassing facility, we can deliver controlled levels of Hydrogen, Oxygen and Nitrogen as required for critical applications.

Dimensional Specifications
Ovality = 0.40 mm maximum
Tolerance = ± 0.30 mm maximum

Coil Particulars

Coil Weight	1 Ton / 2 Ton
Coil Inner Diameter	850 mm
Coil Outer Diameter	1150 to 1250 mm
Coiling Direction	Counter Clockwise
Binding	Wire (Auto Compaction)

Some of the popular grades offered for Wire Rods under the Low Carbon Steel category are as follows :

Internal Standard	Equivalent Grades
Internal Standard	BS	DIN	IS	EN	SAE/AISI	JIS
LCCF	040A04	C10	CS	2A, 2A/1, 2B	SAE1008	SWRCH8A
SAE1015	-	CK15	-	-	SAE1015	-
SAE1012	040A12	CK10	C7, C10	2A/1, 2B	SAE1012	SWRCH12A
SAE1010	-	CK10	C10	-	SAE1010	-
SAE1008	040A04	C10	C5	2A, 2A/1, 2B	SAE1008	SWRCH8A
SAE1020	070M20	CK22	C20	EN 3A	SAE1020	SWRCH20A
P12	-	-	-	-	-	-
SAE1018	-	CK15	C15Mn75	EN32B,EN32C	SAE1018	-

Sizes (mm)
5, 5.5, 6.35, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16.5, 17.5, 18.5, 20, 21, 22, 23, 24, 25.4

Metallurgical Specifications
Surface Defect = 2% of Wire Rod Diameter (maximum)
Depth of Decarburisation = 1.5% of Wire Rod Diameter (maximum)

Grain Size
We can offer both fine grain and coarse grain steel depending on customers' requirement through Silicon Killed / Aluminium Killed steel.

Gaseous Content
With our Vacuum Degassing facility, we can deliver controlled levels of Hydrogen, Oxygen and Nitrogen as required for critical applications.

Inclusion Rating

A		B		C		D
T	H	T	H	T	H	T	H
2	1	2	1.5	2	1	2	1

Dimensional Specifications

Diameter Range	Ovality*	Permissible Tolerance*
5 to 13 mm	0.4 mm maximum	± 0.30 mm maximum
14 to 25.4 mm	0.5 mm maximum	± 0.50 mm maximum

* We can adhere to stricter specifications on mutual agreement.

Coil Particulars

Particulars	Block Route (5.5 mm to 16.5 mm diameter)	Garret Route (14 mm to 25.4 mm diameter)
Supply Condition	Retarded Cooled/ Hot Rolled	Hot Rolled
Coil Weight	1 Ton / 2 Ton	750 kg
Coil Inner Diameter	850 mm	850 mm
Coil Outer Diameter	1150 to 1250 mm	1250 to 1400 mm
Coiling Direction	Counter Clockwise	Counter Clockwise
Binding	Wire (Auto Compaction)	Wire / Strap

Some of the popular grades offered for Wire Rods under the Spring Steel category are as follows :

Internal Standard	Equivalent Grades
Internal Standard	BS	DIN	IS	EN	SAE/AISI	JIS
60Si7	-	60Si7	60Si7	EN45A	-	-
SUP7	-	59Si7	-	EN45A	9260	SUP7
SUP12V	685A57	54SiCr6	-	-	9254	SUP12V
55Si7	-	55Si7	55Si7	EN45A	-	-
EN45	250A53	55Si7	55Si2Mn90	EN45	9255	-
65Si7	-	65Si7	-	EN45A	9260	-
EN45A	250A58	-	-	EN45A	9260	-
50CrV4	735A51	50CrV4	50Cr4V2	EN47	6150	SUP10
SAE9254	-	-	-	-	9254	-
SUP7N	-	-	-	-	9260	SUP7N
SUP11A	-	-	-	-	51B60	SUP11A
SUP9	-	55Cr5	-	-	5155	SUP9

Sizes (mm)
5, 5.5, 6.35, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16.5, 17.5, 18.5, 20, 21, 22, 23, 24, 25.4

Metallurgical Specifications
Surface Defect = 1.5% of Wire Rod Diameter (maximum)
Depth of Decarburisation = 1.5% of Wire Rod Diameter(maximum)

Grain Size
We can offer both fine grain and coarse grain steel depending on customers' requirement through Silicon Killed / Aluminium Killed steel.

Gaseous Content
With our Vacuum Degassing facility, we can deliver controlled levels of Hydrogen, Oxygen and Nitrogen as required for critical applications.

Inclusion Rating

A		B		C		D
T	H	T	H	T	H	T	H
2	1	2	1.5	2	1	2	1

Dimensional Specifications

Diameter Range	Ovality*	Permissible Tolerance*
5 to 13 mm	0.4 mm maximum	± 0.30 mm maximum
14 to 25.4 mm	0.5 mm maximum	± 0.50 mm maximum

* We can adhere to stricter specifications on mutual agreement.

Coil Particulars

Particulars	Block Route (5.5 mm to 16.5 mm diameter)	Garret Route (14 mm to 25.4 mm diameter)
Supply Condition	Retarded Cooled/ Hot Rolled	Hot Rolled
Coil Weight	1 Ton / 2 Ton	750 kg
Coil Inner Diameter	850 mm	850 mm
Coil Outer Diameter	1150 to 1250 mm	1250 to 1400 mm
Coiling Direction	Counter Clockwise	Counter Clockwise
Binding	Wire (Auto Compaction)	Wire / Strap